V2 Edition i10MT 4X4 RTR 1/10 Monster Truck by INTEGY i10MT01-430W

4.2 | 2 reviews | submit yours

V2 Edition i10MT 4X4 RTR 1/10 Monster Truck by INTEGY i10MT01-430W

$197.99

OVERVIEW
Whether you are looking to bash in the backyard or break into MT racing, you can start with the i10MT 1/10-scale 4X4 Performance Monster Truck. Designed for the newcomer to 4WD, we offer this complete package that is ready to run and fun to drive. Starting with a durable, 3-piece molded chassis with replaceable front bulkhead mount and top deck, the i10MT features a center driveshaft with adjustable slipper clutch as standard equipment.

Two metal-gear differentials handle the abuse of off-road, and send power through long-reach dogbones to the four wheels. Large multi-surface treaded racing truck tires are pre-mounted and pre-glued from the factory, ready to roll. A full set of ball bearings throughout the drivetrain are standard equipment. Extra-long suspension arms and upper adjustable turnbuckles pair with long-stroke aluminum bodied oil-filled shocks with threaded preload adjustment and adjustable mounting angles to dampen the bumps and jumps. There are also turnbuckles on the dual bellcrank steering system for toe adjustability. Hex head countersunk hardware is used throughout. A sleek racing-style truck body with rear spoiler is already precut and prefinished. A pre-installed SPECS 430w ESC gives you control over the high-torque, standard 540 size brushed motor. For electronics, you get a 2.4-gHz 2-channel pistol-grip radio system with LiPo battery and servo is pre-installed. A 6-cell 7.2v 1800mAh battery pack included.

CHASSIS
Molded double-deck design w/spine and chassis bracing
Molded battery stay
Separate front bulkhead mount
Bar-type molded front bumper
Lexan rear spoiler
All hex hardware

DRIVETRAIN
4WD Center driveshaft
Front/rear gear differentials
Adjustable slipper clutch
Adjustable motor mount
Front/rear steel dogbones and axles
Full ball bearings in drivetrain
Multi-surface treaded racing truck tires

SUSPENSION
Extra-long lower suspension arms
Turnbuckle adjustable upper links
Long-stroke anodized aluminum oil-filled dampers
Threaded damper bodies
Molded front/rear lower suspension blocks
Adjustable camber
Adjustable caster
Adjustable shock angle
Adjustable upper link mounting points
Adjustable rear hub mounting point

STEERING
Dual bellcrank design
Aluminum steering posts
Adjustable front toe in/out

MORE
Pre-installed 2.4-gHz 2-channel pistol grip radio system w/LiPo battery pack
Pre-installed SPECS 430w ESC
Pre-installed Standard 540 brushed motor w/pinion gear
Pre-installed 6003 steering servo
7.2v 1800mAh stick pack battery
Pre-mounted and pre-glued MT racing-type tires

SPECIFICATIONS
Length: (16.3 (415mm)
Width: (11.29 (303mm)
Height: (7.48 (190mm)
Wheelbase: (11.81 (300mm)
Weight: (3 lbs. 13.7-oz. (1750g)

To get up and running you will need:
Battery charger for main battery pack

Item# i10MT01-430W Barcode: 91789008577

Stock: In Stock Sku: i10MT01-430W

Customer product reviews

4.2 rating based on 2 reviews

Great Starter Vehicle for the price.

4.0 rating

My kids bought this model for their sister for her birthday this last April, and she loves it. It is 4wd and will provide her many years of operation while she learns how to handle RC vehicles better. My only gripe is the Truck comes with an "odd to me" battery connector, and I had to purchase some of them to make up more adapters to be able to charge the battery so she could drive it.

Good truck for the price

4.5 rating

See below for my video links 1St look https://youtu.be/b2vu71_di_g 1st run https://youtu.be/sWrfy3VqZJ8 Verses another truck https://youtu.be/0sizWRaDxo8 To me this is the best looking 4 wheel drive stadium truck out there. The paint Scheme match with the tire and really make it look mean. It does like all car needs a little work so it can run a little bit better. The weakest point is going to be the slipper clutch so if you do get this car do not pay for pull motor in it just stick with a 2 pole motor at around 35 to 3800 KV if you want more speed then just put a 3s lipo in it but stay away from the 4 pole Motors. I would also strengthen the body of some as well by taping the inside of it up but other than that the truck runs really well and I'm looking at purchasing another one :-)?

OVERVIEW
Whether you are looking to bash in the backyard or break into MT racing, you can start with the i10MT 1/10-scale 4X4 Performance Monster Truck. Designed for the newcomer to 4WD, we offer this complete package that is ready to run and fun to drive. Starting with a durable, 3-piece molded chassis with replaceable front bulkhead mount and top deck, the i10MT features a center driveshaft with adjustable slipper clutch as standard equipment.

Two metal-gear differentials handle the abuse of off-road, and send power through long-reach dogbones to the four wheels. Large multi-surface treaded racing truck tires are pre-mounted and pre-glued from the factory, ready to roll. A full set of ball bearings throughout the drivetrain are standard equipment. Extra-long suspension arms and upper adjustable turnbuckles pair with long-stroke aluminum bodied oil-filled shocks with threaded preload adjustment and adjustable mounting angles to dampen the bumps and jumps. There are also turnbuckles on the dual bellcrank steering system for toe adjustability. Hex head countersunk hardware is used throughout. A sleek racing-style truck body with rear spoiler is already precut and prefinished. A pre-installed SPECS 430w ESC gives you control over the high-torque, standard 540 size brushed motor. For electronics, you get a 2.4-gHz 2-channel pistol-grip radio system with LiPo battery and servo is pre-installed. A 6-cell 7.2v 1800mAh battery pack included.

CHASSIS
Molded double-deck design w/spine and chassis bracing
Molded battery stay
Separate front bulkhead mount
Bar-type molded front bumper
Lexan rear spoiler
All hex hardware

DRIVETRAIN
4WD Center driveshaft
Front/rear gear differentials
Adjustable slipper clutch
Adjustable motor mount
Front/rear steel dogbones and axles
Full ball bearings in drivetrain
Multi-surface treaded racing truck tires

SUSPENSION
Extra-long lower suspension arms
Turnbuckle adjustable upper links
Long-stroke anodized aluminum oil-filled dampers
Threaded damper bodies
Molded front/rear lower suspension blocks
Adjustable camber
Adjustable caster
Adjustable shock angle
Adjustable upper link mounting points
Adjustable rear hub mounting point

STEERING
Dual bellcrank design
Aluminum steering posts
Adjustable front toe in/out

MORE
Pre-installed 2.4-gHz 2-channel pistol grip radio system w/LiPo battery pack
Pre-installed SPECS 430w ESC
Pre-installed Standard 540 brushed motor w/pinion gear
Pre-installed 6003 steering servo
7.2v 1800mAh stick pack battery
Pre-mounted and pre-glued MT racing-type tires

SPECIFICATIONS
Length: (16.3 (415mm)
Width: (11.29 (303mm)
Height: (7.48 (190mm)
Wheelbase: (11.81 (300mm)
Weight: (3 lbs. 13.7-oz. (1750g)

To get up and running you will need:
Battery charger for main battery pack

Item# i10MT01-430W Barcode: 91789008577

You May Also Like

Featured Products